Home > product > An on-board > Content

0.6mTablet on-the-move

2018-12-04 16:55:18    reading :

Flat on-the-move satellite communication antenna system by the antenna unit (including plastic flat noodles, wavegui

Flat on-the-move satellite communication antenna system by the antenna unit (including plastic flat noodles, waveguide antenna feed network), radome, inertial measurement system, servo control system (including the turntable, high-frequency joint, motors and drives, position sensor), control host, signal, control and power interface, with high efficiency, light structure, high tracking precision, etc.
The main features of the antenna are as follows:
1) excellent electrical performance of antenna:
A) gain: transmit >36.5dBi, receive >35.5dBi;  
B) cross-polarization isolation: ≥30dB
C) side lobe: ≤ -12db
D) a standing wave 1.3 or less
2) plastic electroplated horn array antenna: it can be quickly mass-produced, with light weight and high gain.
3) independent of GPS information: using satellite beacons to track and correct gyro errors, it can still work normally without GPS information (just manually input the local longitude and latitude once before the initial satellite alignment).
4) initial star speed: GPS/BD module cold start positioning to star time <80s, hot start (or manual input) <60s.
5) high tracking accuracy: in the case of no occlusion, the tracking error is less than 0.5dB(RMS).
6) good stabilization effect: azimuth adopts closed-loop stabilization algorithm, fast steering or "S" travel can still accurately track the satellite.
7) fast recovery time of occlusion: occlusion time <5min, recovery time <3s; Occlusion time <20min, recovery time <5s.
8) quick satellite switching: the switching time between different satellites is <8s.
9) easy to use: it can realize the functions of dynamic star alignment and dynamic tangent.
10) easy maintenance: modular system design, simple interface specification, convenient fault diagnosis and maintenance.
11) safe and green operation: 24V dc operation, power consumption less than 150W, machine weight 78Kg.
12) easy integration: there are only 4 external interfaces, which are data output, dc power supply, if receiving and if transmitting, and the connection relationship is simple.

Technical parameters
Antenna surface form flat antenna
Antenna surface form flat
Steady state type Built in
diameter 0.6m
Frequency Transmit 14~14.5GHz
Receive 12.25~12.75GHz
Typical Gain Transmit 36+20lg(f/14.25)dBi
Receive 35+20lg(f/12.5)dBi
VSWR ≤1.3
Antenna side lobe azimuth ≤-14dB
Pitching ≤-12dB
Port isolation ≥85dB
Cross-polarization isolation ≥30dB
Radome loss ≤0.3dB
Interface form  WR75
Polarization mode              line polarization
 
Automatic capture satellite time (sec)
initial capture time static≤80S
Dynamic≤85S
Shading within 20min  
≤5S
 
rotation range
Pitching 0°~90°
Azimuth 360°continuously
              Polarization 360°continuously adjustable
Antenna rotation maximum angular Azimuth≥200º/S2  Pitch≥60º/S2
Power consumption <150W
Supply voltage 24V(24V dc supply (optional 220V ac supply)
Operating temperature -40°~+55°
Reliability MTBF≥2400h
No damage to wind speed 35m/s(Relative wind speed)
Protection level IP65
Size
Weight(kg) 78
Height(mm) 280
Diameter(mm) 1300
Pictures


Prev:PA450 Next:Highly on-the-move antennas